CLUG PRO HYBRID Bicycle Wall Bracket 1.3"-1.7" Secured with Fidlock

Don’t leave your bike out in the rain! The stylish CLUG PRO HYBRID bicycle wall mount from HORNIT combines a chic design with clever technology so that you can safely store your beloved fixie, hybrid or gravel bike, while also saving space. This can be in the basement, in the garage or warm and dry in your apartment. You can keep the wall on the rear wheel clean by attaching a reusable MUD PAD (prod. code: 2325448). As with the original CLUG, the bike tyre is clamped in the holder, so it is ready for the next tour. The highlight of the stylish CLUG PRO version is the magnetic Fidlock WINCH system, which combines the functions of a quick-release fastener and a cable tensioner to secure the tyre. This keeps the front wheel fixed in the holder, even if you bump into the bike or the tyre deflates. Ideal for small spaces, long storage times or if you just want to be on the safe side when parking your bike by the wall. With the CLUG PRO, even e-bikes with a weight of up to 30 kg can be parked on the wall if they are touching the floor.

The CLUG PRO HYBRID is small, practical and can be quickly and discretely screwed to the wall. By simply flipping the holder, the magnetic WINCH rotary knob can be on either the left or right side, as desired, in order to ensure that the bike can be quickly released or secured with one hand. If when clamping the CLUG PRO grabs the tyre without making contact with the rim, you can put the cord lock around the rim and the clever FIDLOCK mechanism will automatically dock onto the holder. The loop is long enough and can be easily adjusted through shortening it. The interlocking rotary knob winds up the tensioning cord according using the rope winch principle. This secures the wheel in the holder. When the magnetic lock is opened, the cord returns to its full length, ready for the next adjustment.

Details:
Stylish bike wall mount with an organic design
Very practical and space-saving
Clamps the tyre in place
Securely holds bikes up to 30 kg
Magnetic Fidlock securing device with one-hand operation
Suitable, for example, for hybrid bikes, gravel bikes, commuters and fixies
For tyre widths from 33 to 43 mm (1.3”-1.7”)
Easy to mount with two bolts only
Drilling templates included

There are two ways to store your bike:
Vertical, standing on the rear wheel with the front tyre securely clamped
Horizontal, with both wheels on the ground and the rear tyre clamped (front wheel too unstable)

Tip:
You can find suitable HORNIT MUD PADs to protect the wall around the rear wheel here: prod. code: 2325448.

For more CLUG models for various tyre sizes see:
HORNIT CLUG PRO ROADIE – 23-32 mm / 1 ”-1.25” (prod. code: 2325449)
HORNIT CLUG PRO MTB – 44-57 mm / 1.75″-2.25″ (prod. code: 2325451)
HORNIT CLUG PRO MTB XL – 58-69 mm / 2.3″-2.7″ (prod. code: 2325452)

In the box:
1x CLUG PRO HYBRID bike rack
Assembly material for screwing into stone and wood
Manual

Attention:
The measurement of your front or rear wheel tyre width is decisive for optimal clamping of the holder. The information on the tyre does not always correspond to the actual dimensions. We therefore recommend measuring your tyres with a sliding calliper or gauge before ordering.

Attention!
The HORNIT CLUG PRO HYBRID bicycle wall mount is intended for vertical or horizontal fixation of the wheel while the bike is on the ground. It does not serve as a wall bracket without floor contact!
Special screw anchors may be required for a secure hold on lightweight walls and other materials.